Thermatite

Thermatite

Overview

Thermatite Door Systems are built stronger with Neufoam™ technology – a continuous foaming process that renders
cavity-free sections. No air pockets inside the panel ensures superior adhesion of our CFC/HCFC-free polyurethane
insulation to the steel skin, preventing delamination and providing exceptional structural integrity. The door has a
higher strength-to-weight ratio, offers a better thermal barrier (higher R-Value) and resists deflection. Sections
feature thermal breaks and two continuous replaceable seals to minimize air flow. Installed with our highest quality
hardware components, Thermatite Doors are engineered to provide many years of worry-free operation and are suitable for a wide range of applications.

Request A Quote

To receive a quote on this product, please click on the Get A Quote button below.

About the supplier

Richards-Wilcox was incorporated in Canada in 1912, making us the oldest door company in the world. We’re proud of our long history of quality products and we’ve built upon that history to bring you the exceptional line of residential Premium Garage Doors we offer today.

At Richards-Wilcox, we are committed to making the next chapter of our history just as exciting as the first. We are passionate innovators of garage door design and desire to be the highest quality door systems manufacturer in the world.

SECTION THICKNESS

T150-MR / T150 1 1/2″ (38mm) 
T175-MR / T175 1 3/4″ (45mm)
T200MR / T200 2″ (51mm) 
T200A-MR / T200A 2″ (51mm) 
T200-20 2” (51mm) 
T300-MR / T300 (Total Door Thickness) 3″ (76mm)

THERMAL VALUE OF SECTIONS

T150-MR / T150 R 13.21 ft2 hF/Btu
T175-MR / T175 R 16 ft2 hF/Btu
T200MR / T200 R 18.28 ft2 hF/Btu
T200A-MR / T200A R 18.28 ft2 hF/Btu
T200-20 R 18.28 ft2 hF/Btu
T300-MR / T300 R 24.54 ft2 hF/Btu

FACE SHEET PROFILE

 T150-MR / T150 Multi-Ribbed / Ribbed
T175-MR / T175 Multi-Ribbed / Ribbed
T200MR / T200 Multi-Ribbed / Ribbed 
T200A-MR / T200A Multi-Ribbed / Ribbed
T200-20 Flush / White
T300-MR / T300 Multi-Ribbed / Ribbed

FACE SHEET THICKNESS

T150-MR / T150 0.016″ (0.41mm)
T175-MR / T175 0.019″ (0.48mm)
T200MR / T200 0.016″ (0.41mm)
T200A-MR / T200A 0.025″ (0.64mm)
T200-20 20 Gauge
T300-MR / T300 0.016″ (0.41mm)

MAXIMUM OPENING WIDTH

T150-MR / T150 29’-4″ (8941mm)
T175-MR / T175 36’-2″ (11024mm)
T200MR / T200 30’-2″ (9195mm)
T200A-MR / T200A 24’-2″ (7366mm)
T200-20 38’ 2” (11,633 mm)
T300-MR / T300 38′-2″ (11633mm)

WARRANTY

10 years against delamination of the panels
1 year on materials and workmanship

Color Options:
Two coat, baked-on paint system on exterior side, primer and polyester finish coat.

T150-MR / T150        White / Silver / Brown

T175-MR / T175         White / Silver / Brown

T200                           White

T200A-MR / T200A White

T200C                         Almond, Bronze, Brown, Slate Grey, Desert Tan, Sandstone, Café & black

T300-MR / T300A    White

T200-20                     White

       

For additional colours, refer to the T200C Sell Sheet in the Additional Information / Downloads tab.

Standard Hardware

Weatherstripping

Full length retainer and bulb weather strip minimize air flow and ensure weather-tightness at the base of your door.

Trussing

Doors are constructed to withstand wind load specified in ANSI/DASMA 108. Linear style trusses are provided according
to door size. Additional trussing can be provided for higher wind load applications.

Track

Roll formed from commercial galvanized steel. Vertical tracks sloped to ensure weather tight seal. Horizontal track
curve available in 12″ (305mm) or normally provided 16″ (406mm) radius.

Track Brackets

Bolted type, field adjustable, rib reinforced, stamped from 0.123″ (3.1 mm) thick commercial galvanized steel.

Rollers

Ten ball bearings provide years of smooth and quiet operation. 7/16″ (11mm) diameter standard stem, long stem on doors
over 16’-2″ (4928mm) wide.

Counter Balance

Helically wound torsion springs manufactured from oil tempered spring wire, stress relieved, minimum 10,000 cycles. Aluminum die-cast grooved drums. Flexible 7 x 19 construction aircraft type galvanized cables with 5:1 safety factor. 

Higher cycle available upon request.

Horizontal Angle

72″ (1829 mm) long or 90″ (2286mm) for 3″ hardware.

Hinges

Linear type, fabricated from 0.078″ or 0.106″ (2 or 2.7mm) thick zinc plated steel with embossments designed to resist 

higher load and provide greater stability resulting in improved performance.

Top Roller Carrier

Fabricated from zinc plated steel designed to provide greater stability, field adjustable to ensure weather tight seal.

Roller Brackets

Linear type fabricated from 0.078″ or 0.106″ (2 or 2.7mm) zinc plated steel. Graduated type design to ensure weather tight seal.

Shafts

1″ (25mm) diameter 0.078″ (2mm) tube or 1/8″ (3mm) wall keyed full length or 1″ (25mm) diameter cold rolled galvanized
steel keyed full length.

Head Plates

Full height fabricated from galvanized steel, complete with bolt-on type bearings.

Lock

Interior slide bolt type.

Mounting Fasteners

Zinc plated.

Optional Hardware
Combination PVC step plate and lift handle
Exhaust port: 3″ (76 mm) / 4″ (102mm) / 5″ (127mm) diameter
Flexible top weather strip for full width of door
Full height thermal break and anti-friction strip for galvanized end caps
Aluminum end stiles with full height jamb seal (Note: For T175-MR, T175, T175-20 only)
Pass doors: 32″ x 80″ (813mm X 2032mm) four section pass door available in doors up to 16.2’ (4928mm) (Note: *14.2’ (4381mm) for T150 and T200A)